HOT MELT EQUIPMENT OPTIONS

Here are a few of the equipment options that are available with our hot melt systems.

The Semi-Automatic Bleed/Boost Option improves both productivity and safety since bleed and boost functions can be performed from the Touchscreen.

SEMI-AUTOMATIC BLEED/BOOST

The Model 382 Semi-Automatic Bleed/Boost Option improves both productivity and safety since bleed and boost functions can be performed from the Touchscreen. No need to reach inside of a hot drum to open or close a valve. Plus, when the platen reaches the bottom of a drum, it can automatically boost to a park position at the top of the drum and reduce your drum change time.

The Ram Pressure Boost option can double the ram force on the machine, giving you high pump rates even on extremely viscous materials.

RAM PRESSURE BOOST

The Ram Pressure Boost option can double the ram force on the machine, giving you high pump rates even on extremely viscous materials.

A high-temperature pressure transducer can be used to monitor and/or control the output pressure from the pump.

PRESSURE TRANSDUCER WITH MANIFOLD

A high-temperature pressure transducer can be used to monitor and/or control the output pressure from the pump.

Non-stick Platen Coating

NON-STICK PLATEN COATING

Customers that use PUR adhesives love the easy cleaning they get with this non-stick coating on the platen.

Single Point Dispensing Valve

SINGLE-POINT DISPENSING

This dispensing valve is simple, reliable, and can deliver a lot of adhesive quickly.

The Uniflow Handgun is machined out of a solid piece of aluminum, and has a low-force trigger that makes it easy to operate.

HANDGUNS

The Uniflow Handgun has a low-force trigger that makes it easy to operate. Machined out of a solid piece of aluminum, this handgun is built to last.

Connect the exhaust shroud to your existing exhaust system, and fumes will be pulled away from the platen during drum changes.

EXHAUST SHROUD

Connect the exhaust shroud to your existing exhaust system, and fumes will be pulled away from the platen during drum changes.

Hydraulic clamping enables the clamshell to be opened or closed in only 7 seconds.

HYDRAULIC CLAMPING

Offered on our Model 230 machines, hydraulic clamping enables the clamshell to be opened or closed in only 7 seconds.

A Riser Kit lifts the bottom of the base plate off the floor, making it possible to move the machine with a forklift, or to load drums with a drum handler.

RISER

A Riser Kit lifts the bottom of the base plate anywhere from 4″ to 13″ (customer selected) off the floor. This makes it possible to move the machine with a forklift, or make it easier to load drums with a drum handler.

The clamshell allows fiber drums to be used even if they are damaged.

CLAMSHELL

The clamshell allows fiber drums to be used even if they are damaged.

The linear position sensor allows the customer to capture real-time pump rate data. It can also be used to coordinate multi-drum operation when continuous flow is needed.

LINEAR POSITION SENSOR

The linear position sensor allows the customer to capture real-time pump rate data. It can also be used to coordinate multi-drum operation when continuous flow is needed.

This abrasive-resistant pump lasts twice as long as competing pumps, and at half the price.

ABRASIVE-RESISTANT PUMP

Do you have an abrasive material? Then you need our abrasive-resistant pump. This pump lasts twice as long as competing pumps, and at half the price.

The T-Bar Manifold will evenly distribute hot melt across the width of a roll coater.

T-BAR MANIFOLDS

The T-Bar Manifold will evenly distribute hot melt across the width of a roll coater.

The split design of the Uniflow containment cone, or dispensing head, makes it easy to change dies, and the double hinge configuration keeps the input hose from kinking.

CONTAINMENT CONE

Cable manufacturers appreciate the design of our containment cone, or dispensing head. The split design makes it easy to change dies, and the double hinge configuration keeps the input hose from kinking. The easily adjustable photo-eye maintains the desired “donut” of mastic for the stranding application.

Our remote support options provides faster troubleshooting, quick repairs, and remote system optimization.

REMOTE SUPPORT

Is an hour of downtime too much? Order a remote support option for faster troubleshooting, quick repairs, and remote system optimization.

Do you already have a T-Bar or Slot Die that you would like to use with your new Uniflow? Use this “pigtail” to heat and control your device.

PIGTAIL

Do you already have a T-Bar or Slot Die that you would like to use with your new Uniflow? No problem. We can use this “pigtail” to heat and control your device.

CUSTOMER REVIEWS

Hot Melt Equipment Manufacturer in the United States
★★★★★ 5 / 5 stars

Rated By Mark C.

“Before purchasing Uniflow equipment, we started out using cold press, an incredibly labor-intensive process. As demand increased, we moved over to using a roll coater with a 5-gallon pail unloader. Over time, demand continued to increase, and it occurred to us that the labor involved in changing a 5-gallon pail was not much different than changing a 55-gallon drum, so we purchased a Uniflow hot melt drum unloader. I was, at first, reluctant to make the capital investment in a larger hot melt unloader, but the Uniflow system has met or exceeded my expectations in every way possible. There has been a significant improvement in productivity from using a 55-gallon drum unloader. The operator interface is simple and clear. The Uniflow team did a fantastic job of training our employees. We were very pleased with the install. The technician, the sales team, and everyone at Uniflow has been very helpful and patient.”

LEARN MORE ABOUT OUR HOT MELT EQUIPMENT

To get technical specifications pertaining to any of the above hot melt equipment or to learn more about our other hot melt dispensing equipment, contact us online. We can also help custom design hot melt drum unloaders and other adhesive dispensing solutions for your operation on a case-by-case basis.